Data East 12v Power

Note: there are 2 power options here. First is by coin door. Second is CN5 in head. Both are shown below.

Now we will run the power for the light strip to the front of the cabinet and plug into the coin door 12v harness.

Our cable comes with two plugs:

The black wire plug goes to the black wire on the very end of the harness. The red wired plug goes to the grey wire on the very far other end. These two together provide 12vdc and ground. The light strips is polarized so it will not light up if these wires are backwards.

If you don't have the power adapter shown in these photos, we do have an alternate power adapter available that goes on CN5 of the power board. The connector is 8 pins but only 6 of those wires are used. Here is a photo of how to install our power adapter on the CN5 connector in the head: